// Practice labs
Hands-on labs with real answers
// Format
What every lab includes
Topology
A diagram plus the starting configs, ready to load.Objectives
What you will be able to do when you finish.Tasks
Step-by-step instructions, from simple to challenging.Verification
The exact show commands and expected output.Solution
Full worked solution, hidden until you want it.Break/fix variant
The same lab with faults injected to troubleshoot.
// Labs
Practice labs
- Ciscoassociate
CCNA lab 12: Design a VLSM addressing plan
Size every subnet for a two-site company with room to grow, find out whether the /22 you were given is enough, and build a plan without overlaps.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 11: IPv6 dual stack and static routing
Add IPv6 to the three-router topology, use simple link-local addresses, route with static IPv6 routes and let hosts autoconfigure with SLAAC.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 10: Port security, DHCP snooping and DAI
Lock access ports to known devices, stop a rogue DHCP server, and block ARP spoofing on an access switch.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 9: Standard and extended ACLs
Restrict SSH management to the staff VLAN, keep guests away from internal networks while allowing web and DNS, and read ACL hit counters.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 8: DHCP, DHCP relay and PAT
Make R1 the DHCP server for staff, relay guest requests to a server, translate all inside traffic with PAT and publish a web server with static NAT.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 7: Single-area OSPFv2
Replace static routes with OSPF area 0 — router IDs, passive interfaces, point-to-point links, cost tuning, default route origination and a neighbour fault to fix.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 6: Static, default and floating static routes
Route between three LANs with static routes, add a default route to the ISP, and build a backup path with a floating static route.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 5: LACP EtherChannel
Bundle two links between SW1 and SW2 with LACP, run the trunk over the port-channel, and diagnose a suspended member.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 4: Spanning Tree root and edge protection
Find the root bridge STP elected on its own, move it to the switch you choose, predict port roles, and protect edge ports with PortFast and BPDU Guard.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 3: Inter-VLAN routing
Route between VLAN 10 and VLAN 20 first with router-on-a-stick, then with SVIs on a Layer 3 switch.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 2: VLANs and 802.1Q trunks
Create VLANs on two switches, assign access ports, build a trunk with a safe native VLAN and a pruned allowed list, and prove it works.
18 Nov 2026 · 1 min - Ciscoassociate
CCNA lab 1: Basic device setup and SSH
Configure a new switch from scratch — hostname, secrets, banner, management SVI, SSH-only access — and save it.
18 Nov 2026 · 1 min
// Platforms
Use the lab platform you already have
- Cisco Packet Tracer
- GNS3
- EVE-NG
- Containerlab
Vendor images are not distributed by us; use images you are licensed to run.