Skip to content
FALCON CORETECHNOLOGIES

// Lesson 8 of 49 · IPv4 addressing and subnetting

Binary and the IPv4 address

Converting between decimal and binary, the structure of an IPv4 address, private and special ranges.
3 min read#ipv4#binary#rfc1918

An IPv4 address is a 32-bit number. We write it as four decimal octets (8 bits each) separated by dots — 192.168.10.25 — because 32 ones and zeros are hard to read. Subnetting is simply working with those bits, so binary comes first.

The octet table

Each bit in an octet has a value. Memorise this row — everything in subnetting uses it:

Bit 1st 2nd 3rd 4th 5th 6th 7th 8th
Value 128 64 32 16 8 4 2 1

Decimal → binary

Convert 172: go left to right, take each value if it fits.

  • 128 fits (172 − 128 = 44) → 1
  • 64 does not fit → 0
  • 32 fits (44 − 32 = 12) → 1
  • 16 does not → 0
  • 8 fits (12 − 8 = 4) → 1
  • 4 fits (4 − 4 = 0) → 1
  • 2, 1 → 0 0

172 = 10101100

Binary → decimal

11000000 = 128 + 64 = 192. Add the values where the bit is 1.

Values worth knowing by heart

These appear in every subnet mask: 128, 192, 224, 240, 248, 252, 254, 255 — each is the previous one plus the next bit value (128, 128+64, 192+32, …).

Network part and host part

Every address has a network portion (shared by all devices in the subnet) and a host portion (unique to the device). The subnet mask — next lesson — says where the boundary is.

Historical classes

Before CIDR, the first octet decided the network size. You still hear the terms:

Class First octet Default mask
A 1–126 255.0.0.0 (/8)
B 128–191 255.255.0.0 (/16)
C 192–223 255.255.255.0 (/24)
D 224–239 Multicast
E 240–255 Reserved

127.0.0.0/8 is reserved for loopback (127.0.0.1 is "this host").

Private addresses (RFC 1918)

These ranges are not routed on the internet and can be reused inside any organisation. NAT translates them to public addresses at the edge.

Range Prefix
10.0.0.0 – 10.255.255.255 10.0.0.0/8
172.16.0.0 – 172.31.255.255 172.16.0.0/12
192.168.0.0 – 192.168.255.255 192.168.0.0/16

Other special addresses

  • 169.254.0.0/16 — APIPA / link-local. A Windows PC that cannot reach a DHCP server gives itself one of these. Seeing 169.254.x.x is a strong hint that DHCP failed.
  • 0.0.0.0 — "this network" / "any"; used in default routes (0.0.0.0/0).
  • 255.255.255.255 — limited broadcast.
  • 100.64.0.0/10 — carrier-grade NAT shared space, used by some ISPs.

Key points

  • IPv4 = 32 bits = 4 octets; bit values 128 64 32 16 8 4 2 1.
  • Know the mask values 128, 192, 224, 240, 248, 252, 254, 255.
  • Private ranges: 10/8, 172.16/12, 192.168/16.
  • 169.254.x.x on a client means DHCP did not work.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.