// Lesson 27 of 49 · Wireless LANs
Creating a WLAN on a wireless LAN controller
The building blocks on a WLC — interfaces, WLANs, security and QoS settings — and how they fit together.
2 min read#wireless#wlc
Controller GUIs differ between platforms and versions, but the building blocks are the same. Learn the objects and the order you create them in, and any WLC becomes familiar.
Wired connectivity first
- Switch port to the WLC: trunk, allowing the management VLAN and each client VLAN.
- The WLC needs a management interface (IP address, VLAN, gateway) — APs join this address.
- APs must reach the WLC: same VLAN, DHCP option 43, DNS name
CISCO-CAPWAP-CONTROLLER, or manual priming.
Building blocks
| Object | What it represents |
|---|---|
| Dynamic interface (or VLAN mapping) | A client VLAN on the WLC, with an IP and gateway; ties an SSID to a VLAN |
| WLAN | The SSID plus its settings |
| Security | Layer 2 (WPA2/WPA3, PSK/SAE or 802.1X) and optional Layer 3 (web authentication) |
| AAA servers | RADIUS servers for 802.1X |
| QoS profile | Platinum (voice), Gold (video), Silver (best effort), Bronze (background) |
| AP groups / tags | Which APs broadcast which WLANs |
Typical workflow for a staff WLAN
- Create the client VLAN interface (for example VLAN 10, gateway 192.168.10.1).
- Add the RADIUS server under AAA (address, shared secret).
- Create the WLAN: profile name, SSID, WLAN ID.
- General: map it to the VLAN 10 interface; enable it.
- Security: WPA2/WPA3 with 802.1X, select the RADIUS server.
- QoS: Silver for data (Platinum only for voice SSIDs).
- Advanced: enable protected management frames (required for WPA3), set client exclusion and session timeouts.
- Apply it to the right AP group / site.
- Test with a client; check the client's state and assigned VLAN on the controller's monitoring page.
Management access to the WLC
Use HTTPS and SSH only, disable HTTP/Telnet, use TACACS+ or RADIUS for admin logins where available, and restrict management to the management VLAN.
Key points
- WLC uplink is a trunk; APs join the management interface.
- WLAN = SSID + VLAN mapping + security + QoS.
- Create the VLAN interface and AAA server before the WLAN.
- QoS profiles: Platinum, Gold, Silver, Bronze.
Sign in to save your lesson progress across devices. You can read every published lesson without an account.