Skip to content
FALCON CORETECHNOLOGIES

// Lesson 46 of 49 · Automation and programmability

Planes, controllers and software-defined networking

Data, control and management planes; traditional vs controller-based networks; northbound and southbound APIs; underlay, overlay and fabric.
2 min read#sdn#automation#controllers

The three planes

Plane Job Examples
Data (forwarding) plane Move packets/frames, fast, in hardware Switching a frame, routing a packet, applying an ACL
Control plane Decide how to forward OSPF, STP, ARP, building the routing and MAC tables
Management plane Configure and monitor the device SSH, SNMP, syslog, APIs

In a traditional network, every device runs its own control plane and is configured one by one, usually through the CLI.

Controller-based networking

A controller centralises (part of) the control and management planes. Engineers express intent once — "guests may only reach the internet" — and the controller turns it into configuration for every device.

Traditional Controller-based
Configuration Device by device, CLI Central policy, pushed by the controller
Consistency Depends on people Enforced by software
Visibility Per device Network-wide, with analytics
Change speed Slow, error-prone at scale Fast, repeatable

APIs: north and south

  • Northbound APIs — between the controller and applications/engineers (usually REST with JSON).
  • Southbound APIs — between the controller and the devices (for example NETCONF, RESTCONF, OpenFlow, CLI over SSH, SNMP).

Underlay, overlay and fabric

  • Underlay — the physical network and its routing that provides basic IP connectivity.
  • Overlay — virtual tunnels built on top of it (for example VXLAN) to create logical networks independent of the physical layout.
  • Fabric — underlay plus overlay managed as one system (Cisco SD-Access is an example in campuses; SD-WAN applies the idea to WAN links).

Key points

  • Data plane forwards; control plane decides; management plane configures.
  • Controllers turn central intent into device configuration.
  • Northbound = apps to controller (REST); southbound = controller to devices.
  • Overlays run on top of the underlay; together they form a fabric.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.