Skip to content
FALCON CORETECHNOLOGIES

// Lesson 41 of 49 · Security fundamentals

Hardening device access

Secrets and password types, local users, login protection, SSH-only management, banners, unused ports and a hardening checklist.
2 min read#hardening#passwords#security

A router or switch with weak access controls gives an attacker control of every packet that crosses it.

Passwords and secrets

Command Storage
enable password Clear text (or weak type 7 with encryption service) — do not use
enable secret Hashed — use this
username X password Clear/type 7 — do not use
username X secret Hashed — use this

Modern IOS hashes secrets with type 8 (PBKDF2) or type 9 (scrypt):

R1(config)# enable algorithm-type scrypt secret <STRONG-SECRET>
R1(config)# username netadmin privilege 15 algorithm-type scrypt secret <STRONG-SECRET>
R1(config)# service password-encryption       ! hides remaining clear-text passwords (weak, type 7)
R1(config)# security passwords min-length 12

Type 7 is reversible — treat it as obfuscation, not protection.

Protect logins

R1(config)# login block-for 120 attempts 5 within 60
R1(config)# login on-failure log
R1(config)# line vty 0 15
R1(config-line)# transport input ssh
R1(config-line)# login local
R1(config-line)# access-class 5 in
R1(config-line)# exec-timeout 10 0
R1(config)# line console 0
R1(config-line)# login local
R1(config-line)# exec-timeout 10 0

login block-for stops brute-force attempts for 120 seconds after 5 failures within 60 seconds.

R1(config)# banner motd ^
Authorised access only. Activity is logged and monitored.
^

Never put device names, locations or "welcome" wording in a banner.

Switch edge hygiene

SW1(config)# interface range GigabitEthernet1/0/30 - 48
SW1(config-if-range)# switchport mode access
SW1(config-if-range)# switchport access vlan 998        ! unused "parking" VLAN
SW1(config-if-range)# shutdown
SW1(config)# interface range GigabitEthernet1/0/1 - 29
SW1(config-if-range)# switchport nonegotiate
SW1(config-if-range)# no cdp enable

Turn off what you do not use

R1(config)# no ip http server
R1(config)# ip http secure-server          ! only if the GUI is needed
R1(config)# no ip source-route
R1(config)# no service pad

Hardening checklist

  1. enable secret and local users with secret, strong and unique.
  2. SSH v2 only; Telnet disabled; VTY ACL; timeouts.
  3. AAA with a central server (next lessons) and a local fallback account.
  4. Unused ports shut and parked in an unused VLAN; DTP off.
  5. Unused services off; HTTPS only if a GUI is needed.
  6. NTP, syslog and SNMPv3 configured; time-stamped logs.
  7. Configuration backed up off the device.
  8. Software kept up to date with vendor security advisories.

Key points

  • Always secret, never password; type 7 is reversible.
  • Block brute force with login block-for; restrict VTY with access-class.
  • Shut and park unused ports; disable DTP and unnecessary services.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.