Skip to content
FALCON CORETECHNOLOGIES

// Lesson 37 of 49 · IP services

SNMP and syslog

Monitoring devices with SNMP v2c and v3, and logging to a syslog server with the right severity levels.
2 min read#snmp#syslog#monitoring

SNMP — monitoring

SNMP lets a monitoring system (the manager, or NMS) read and sometimes change information on devices (the agents). Data is organised in the MIB; each value has an OID.

Operation Direction Port
Get / GetNext / GetBulk Manager polls agent UDP 161
Set Manager changes a value UDP 161
Trap / Inform Agent alerts manager (inform is acknowledged) UDP 162

Versions

Version Security
v1, v2c Community strings sent in clear text — read-only at most, and only on a protected network
v3 Users with authentication (authNoPriv) and encryption (authPriv). Use this.
! SNMPv2c read-only, limited by ACL
R1(config)# access-list 99 permit 192.168.1.30
R1(config)# snmp-server community <RO-STRING> RO 99

! SNMPv3 with authentication and encryption
R1(config)# snmp-server group NMS v3 priv
R1(config)# snmp-server user nmsuser NMS v3 auth sha <AUTH-PASS> priv aes 128 <PRIV-PASS>
R1(config)# snmp-server host 192.168.1.30 version 3 priv nmsuser

Syslog — logging

Devices produce log messages like:

*Oct  7 10:22:41.123 GST: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down

Format: %FACILITY-SEVERITY-MNEMONIC: description.

Severity levels (lower = more serious)

Level Name
0 Emergency
1 Alert
2 Critical
3 Error
4 Warning
5 Notification
6 Informational
7 Debugging

A memory aid: Every Awesome Cisco Engineer Will Need Ice-cream Daily.

Setting a level logs that level and everything more severe (lower numbers).

Where logs go

R1(config)# logging host 192.168.1.40            ! syslog server, UDP 514
R1(config)# logging trap informational           ! levels 0-6 to the server
R1(config)# logging buffered 64000 warnings      ! keep levels 0-4 in RAM
R1(config)# logging console warnings
R1(config)# service timestamps log datetime msec
R1# show logging
R1# terminal monitor                               ! see logs in your SSH session

Logs are only useful with correct time — configure NTP first.

Key points

  • SNMP polls on UDP 161, traps/informs on UDP 162.
  • v2c communities are clear text; use SNMPv3 authPriv.
  • Syslog severities 0 (emergency) to 7 (debugging); a level includes everything more severe.
  • Send logs to a central server on UDP 514, with timestamps.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.