// Lesson 14 of 49 · IPv6
IPv6 address types and autoconfiguration
Unicast address types
| Type | Prefix | Scope | Notes |
|---|---|---|---|
| Global unicast (GUA) | 2000::/3 (starts with 2 or 3) | Internet-routable | The IPv6 equivalent of a public address |
| Unique local (ULA) | fc00::/7 (in practice fd00::/8) | Inside an organisation | Similar in purpose to RFC 1918 |
| Link-local | fe80::/10 | One link only | Every IPv6 interface has one; never routed |
| Loopback | ::1/128 | The host itself | Like 127.0.0.1 |
| Unspecified | ::/128 | — | "No address yet" |
Routers use the neighbour's link-local address as the next hop in routing protocols, which is why every interface always has one.
Multicast
Multicast addresses start with ff. Ones you will see:
| Address | Meaning |
|---|---|
| ff02::1 | All nodes on the link |
| ff02::2 | All routers on the link |
| ff02::5 / ff02::6 | OSPFv3 routers / DR routers |
| ff02::1:ffXX:XXXX | Solicited-node multicast, used by NDP instead of ARP broadcast |
Anycast
An anycast address is assigned to several devices; packets go to the nearest one according to routing. It looks like a normal unicast address. Public DNS services are a well-known example.
EUI-64 interface IDs
A device can build its 64-bit interface ID from its 48-bit MAC address:
- Split the MAC in half:
00:1a:2b|3c:4d:5e. - Insert
ff:fein the middle:00:1a:2b:ff:fe:3c:4d:5e. - Flip the 7th bit of the first byte:
00→02.
Result: 021a:2bff:fe3c:4d5e. Many operating systems use random interface IDs instead, for privacy.
How hosts get addresses
Routers send Router Advertisements (RAs) with the prefix and flags. Hosts then use one of:
| Method | Address from | Other info (DNS) from |
|---|---|---|
| SLAAC | Host builds it from the RA prefix + its own interface ID | RA (RDNSS option) |
| Stateless DHCPv6 | SLAAC | DHCPv6 server |
| Stateful DHCPv6 | DHCPv6 server | DHCPv6 server |
The default gateway always comes from the RA (the router's link-local address), never from DHCPv6.
Neighbour Discovery (NDP)
NDP uses ICMPv6 messages: Router Solicitation/Advertisement (RS/RA) and Neighbour Solicitation/Advertisement (NS/NA). NS/NA replace ARP; duplicate address detection (DAD) checks that an address is not already in use before the host uses it.
Key points
- GUA 2000::/3, ULA fd00::/8, link-local fe80::/10, multicast ff00::/8.
- Every interface has a link-local address; routers use it as next hop.
- EUI-64: insert fffe and flip the 7th bit.
- SLAAC, stateless DHCPv6, stateful DHCPv6 — the gateway always comes from RAs.
Sign in to save your lesson progress across devices. You can read every published lesson without an account.