Skip to content
FALCON CORETECHNOLOGIES

// Lesson 45 of 49 · Security fundamentals

VPN concepts

Site-to-site and remote-access VPNs, IPsec building blocks, GRE, and SSL/TLS VPNs.
2 min read#vpn#ipsec

A VPN builds a private, encrypted tunnel across a network you do not trust — usually the internet.

Two kinds

Site-to-site Remote access
Connects Two networks (branch ↔ HQ) One user device ↔ the company network
Built by Routers or firewalls at each site A VPN client on the device (or a browser)
Users notice Nothing — it is always on They start the client and log in
Typical technology IPsec TLS/SSL VPN or IPsec (IKEv2)

IPsec building blocks

Function Provided by
Confidentiality Encryption — AES
Integrity Hashing — SHA-2
Authentication of the peers Pre-shared keys or certificates
Key exchange Diffie-Hellman groups, negotiated by IKE (IKEv2 preferred)
Anti-replay Sequence numbers

IPsec has two protocols: ESP (encryption and integrity — what is normally used) and AH (integrity only; incompatible with NAT). Tunnel mode encrypts the whole original packet and adds a new IP header — the mode used for site-to-site VPNs.

The negotiation happens in two phases: IKE first builds a secure management channel between the peers, then negotiates the IPsec security associations that actually protect the traffic.

GRE and GRE over IPsec

GRE tunnels can carry multicast and routing protocols (such as OSPF) but are not encrypted. Combining GRE with IPsec gives both: dynamic routing over the tunnel and encryption.

Remote-access VPN

A user's laptop runs a client (for example Cisco Secure Client) that connects to a VPN head-end — a firewall or router. The connection usually uses TLS (the same protection as HTTPS), so it passes through most networks. Policies decide whether all traffic or only company traffic goes through the tunnel (full vs split tunnelling).

Key points

  • Site-to-site joins networks; remote access joins users.
  • IPsec: AES for confidentiality, SHA for integrity, IKE for keys, ESP in tunnel mode.
  • GRE carries routing protocols but is not encrypted on its own.
  • Remote-access VPNs commonly use TLS.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.