Skip to content
FALCON CORETECHNOLOGIES

// Lesson 1 of 49 · Network fundamentals

What a network is made of

Endpoints, switches, routers, firewalls, access points, controllers and servers — what each one does and where it sits.
3 min read#fundamentals#devices

A network is a set of devices that exchange data using agreed rules (protocols). Before configuring anything, you need to know which device does which job — most design and troubleshooting questions start with "which device makes this decision?".

Endpoints

Endpoints are the devices people actually use or that provide services: laptops, phones, printers, IP cameras, servers, virtual machines. They create and consume data. An endpoint needs, at minimum:

  • an IP address and subnet mask (who am I, and who is local?),
  • a default gateway (where do I send traffic for other networks?),
  • a DNS server (how do I turn names into addresses?).

Switches — moving frames inside a network

A Layer 2 switch connects devices in the same local network. It looks at the destination MAC address of each Ethernet frame and sends the frame only out of the port where that address lives. Switches:

  • learn which MAC addresses are behind which ports,
  • separate networks logically with VLANs,
  • do not, on their own, move traffic between different IP networks.

A multilayer (Layer 3) switch can also route between VLANs. In most campus networks the core and distribution switches are Layer 3 switches.

Routers — moving packets between networks

A router connects different IP networks. It reads the destination IP address of each packet, looks it up in its routing table and forwards it towards the next hop. Routers also often provide NAT, DHCP, VPNs and the connection to the internet or WAN.

A simple rule: switches forward frames within a network; routers forward packets between networks.

Firewalls — deciding what is allowed

A firewall sits between zones with different levels of trust (for example, inside and internet) and permits or denies traffic according to a policy. Modern next-generation firewalls (NGFWs) also identify applications and users and can inspect traffic for threats. Firewalls are stateful: they remember outgoing connections and automatically allow the matching return traffic.

Wireless access points and controllers

An access point (AP) connects wireless clients to the wired network. In larger networks APs are managed centrally by a wireless LAN controller (WLC) or a cloud dashboard, which pushes configuration and handles roaming. Module 5 covers this in detail.

Servers and services

Servers provide shared services: DHCP (hands out addresses), DNS (resolves names), authentication (for example RADIUS), file, web and application services. On the CCNA you will configure some of these on Cisco devices directly.

Physical vs logical topology

  • The physical topology shows the real cables and devices.
  • The logical topology shows how traffic flows: VLANs, subnets, routing paths.

Two devices plugged into the same switch can be in completely different logical networks if they are in different VLANs.

Key points

  • Endpoints need an IP address, mask, default gateway and DNS server.
  • Switches use MAC addresses inside a network; routers use IP addresses between networks.
  • Firewalls enforce policy between trust zones and track connection state.
  • APs give wireless access; controllers or cloud dashboards manage many APs at once.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.