Skip to content
FALCON CORETECHNOLOGIES

// Lesson 11 of 49 · IPv4 addressing and subnetting

VLSM — addressing plans without waste

Variable-length subnet masks — allocating the largest networks first so every segment gets exactly what it needs.
2 min read#vlsm#subnetting#design

With fixed-size subnets, a point-to-point link needing 2 addresses wastes the same space as a user LAN needing 100. VLSM (variable-length subnet masking) lets each segment use the prefix that fits it.

The rule: biggest first

Always allocate the largest requirement first, then the next largest, from the start of the free space. This keeps every subnet on a valid boundary and avoids overlaps.

Worked example

Block: 172.20.10.0/24. Requirements:

Segment Hosts needed
Staff LAN 100
Guest Wi-Fi 50
Servers 20
Management 10
WAN link R1–R2 2
WAN link R1–R3 2

Choose the smallest prefix for each:

Segment Hosts Prefix Size
Staff LAN 100 /25 (126) 128
Guest Wi-Fi 50 /26 (62) 64
Servers 20 /27 (30) 32
Management 10 /28 (14) 16
WAN R1–R2 2 /30 (2) 4
WAN R1–R3 2 /30 (2) 4

Allocate in order:

Segment Network Hosts Broadcast
Staff LAN 172.20.10.0/25 .1 – .126 .127
Guest Wi-Fi 172.20.10.128/26 .129 – .190 .191
Servers 172.20.10.192/27 .193 – .222 .223
Management 172.20.10.224/28 .225 – .238 .239
WAN R1–R2 172.20.10.240/30 .241 – .242 .243
WAN R1–R3 172.20.10.244/30 .245 – .246 .247

Free for growth: 172.20.10.248/29.

Design habits worth keeping

  • Leave room to grow — a LAN that needs 100 hosts today may need 150 next year.
  • Keep a consistent scheme: for example .1 is always the gateway.
  • Group related subnets so they can be summarised.
  • Document the plan in one table (an IPAM tool or a spreadsheet) before configuring anything.

Checking for overlaps

Two subnets overlap if one's range contains the other's network address. With VLSM done biggest-first on block boundaries, overlaps cannot happen — they appear when someone adds a subnet later without checking the plan.

Key points

  • VLSM = different prefix lengths in one block.
  • Allocate largest first, on block boundaries.
  • Use /30 (or /31) for point-to-point links.
  • Keep the addressing plan documented and leave spare space.

Sign in to save your lesson progress across devices. You can read every published lesson without an account.